["brand new and high quality\nFeatures:\nUsing high strength alloy steel forging, the overall heat treatment, fastening durable.\nM4-10 broken for head corkscrew extractor is a three-claw design. \nM10 and above broken for head corkscrew extractor is a four-claw design.\nThe quadrilateral for head is designed to be more wiggly and can be used for the handlebars as well as for the motion wrench.\nSuper performance and wide application.\nBroken Tap Extractor only, other accessories demo in the picture is not included!\n\nHow to use:\n1.Insert the extractor into the tap slot of the same specification.\n2.Rotate the lever handle counterclockwise (take the left tap and rotate clockwise) to remove the tap in the work.\n3.Does not damage the finished silk surface, the operation is easier and effective.\n\nSpecifications:\nItem Type: Broken Tap Extractor\nMaterial: HSS 6542\nA Package Size: 105x157mm/4.13x6.18in\nB Package Size: 165x98mm/6.50x3.86in\nC Package Size: 260x195mm/10.24x7.68in\nD Package Size: 194x138mm/7.64x5.43in\nColor: As pictures shown\nQuantity: 1 Set\n\nNote:\nThis kind of extractor is only suitable for the broken tap which is not too tight.\nIf the tap is too tight, it will break the claw easily.\nThe smaller the extractor, the easier to break, the lower the success rate.\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included: (Optional)\nA-type(5Pcs) Standard Packing without Case：\n2#-M5, 3#-M6, 4#-M7-8, 5#-M9-10, 6#-M11-12 \n\nOR\nB-type(6Pcs) Standard Packing without Case：\n1#-M4, 2#-M5, 3#-M6, 4#-M7-8, 5#-M9-10, 6#-M11-12\n\nOR\nC-type(9Pcs) Standard Packing without Case：\n2#-M5,3#-M6,4#-M7-8,5#-M9-10,6#-M11-12,7#-M14,8#-M16,,10#-M22-24 \n\nOR\nD-type(10Pcs) Luxury Packing with Blue Case:\n1#-M4,2#-M5,3#-M6,4#-M7-8,5#-M9-10,6#-M11-12,7#-M14,8#-M16,,10#-M22-24"]