<p>1.XIC PE4165-4IL connects to NVMe SSD or PCle through SlimSAS (SFF-8654) Cable,bandwidth PCle4.0 x16.</p> <p>2.This card requires the motherboard BIOS to support the PCIE slot split function,and uses M6-level high-speed PCB board to reduce the length of the signal line and minimize signal loss.</p> <p>3.The board height does not exceed 40MM (excluding installation baffles),cost-effectively upgrade the system to meet the high-performance needs of today's data centers and enterprise-level applications</p> <p>4.U.2 SSD is 4 times faster than SATA SSD,providing faster read and write speeds,high-speed file access and transfer,and fast boot time</p> <p>5.Use SFF-86548I to 2xU.2 data cable to connect the 2.5-inch NVMe SSD to the motherboard. Supports most operating systems and has stable performance.</p> <p>Interface type: 2xSFF-86548I</p> <p>Supported equipment: 4x NVMe SSD hard drive</p> <p>Access bus: PCle x16,requires motherboard; supports split function</p> <p>Different Batches May Have Differences In Product Appearance,Color,And Printed Characters,Which Not Affect The Use</p> <p>Colour:As Shown</p> <p>Material:PCB</p> <p>Package Contents:</p> <p>1x PCI Express 2-Ports SlimSAS Card</p> <p>1x Half Height Baffle</p> <p>1x Full Height Baffle (Already Installed)</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>