Intelligent Multimeter with Multiple Functions: it can measure AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency, continuity and diode test, fire wire detection, etc. Dual Flashlights Design: two torch at the top for auxiliary lighting up the working area in the low lit or dark environment, not afraid of dark when working, and it will automatically turned off after about 5 minutes NCV Non-contact Voltage Detection: place the NCV sensor closer to the measured cable, and the multimeter can detect whether the voltage is greater than 90V AC voltage. When the AC voltage being detected, the meter buzzer alarms and the LCD analog bar displays the induction intensity Safety Operation: built-in overload conservation fuse, smart anti-burn. Meet the DC/AC 600V CAT III overvoltage standard, and double insulation conservation(class II) Large LCD Screen & Easy to Control: soft push buttons is easy to operate, the large LCD display screen with bright backlight, convenient to check the measured data at a glance even in the dark environment. Compact & Accurate: as small as a mobile phone, convenient to use and carry around. Built-in with high performance chip to ensure its accuracy Specifications: DC current: 20mA-10A AC current: 20mA-10A DC voltage: 600.0mV-600.0V AC voltage: 600.0mV-600.0V Resistance: 600.0Ω-60.00mΩ Hertz: 100.0Hz-1000Hz Capacitance: 0nF-99.99mF Temperature: 1℃/1℉ Diode: √ Zero live wire: √ Dual flashlight: √ Backlight: √ On/off buzzer: √ Data retention: √ Automatic shutdown: √ NCV induction: √ Low battery indication: √ Battery: AAA battery*2 (not included) Maximum count: 6000 counts