Specification: Material：Copper, Glass Finish: Polished chrome Valve Core: Ceramic valve core Structure: Single coupled Functional categories: Mixing faucet Type: Basin Faucet Accessories: Two 50cm Inlet pipe and installation accessories Installation Instructions: Using MS wrench to remove the film, and then find out the right height to draw the position of the punch. Using a 4mm drill to dig holes and stuffed expansion grain Fixed film. Double-dip sit products can be adjusted according to the horizontal and vertical hole. Placed the base frame to make it balanc ed and fixed with a hex wrench. Placed the glass in the right place and then prssed glass clamping screws with a flat blade screwdriver. Installation tips: A double dip sit can adjust the left and right of the product according film anyway hole. The upper and lower positions to keep the product level. Installation Preparation: To prvent bubbles blocked or spool is damaged, the residual dirty water, debris, sand and the impurities in the pipes should be clean before the faucet installing. Clear surface: 1, regular use of cleaners scrub decontamination,before scrubbing, wash the faucet surface with clean water and the wipe dry with a soft cotton cloth, gently wipe together with a neutral detergent, to keep the surface clean. 2, Do not use any abrasive cleaners, hard cloth, paper towels or wire ball, as well as any material containing acidic, rough detergent or soap and other items to clean the faucet surface. Filter cleaning: Remove the bubble head, remove the filter, then scrub the filter with a toothbrush or small brush under the faucet.