Brickstuff Good vs. Evil Laser Sword 2-Pack with Adapter Board - KIT07
The battle is on
This kit contains two laser swords with cool white LEDs hand-soldered and mounted inside original LEGO lightsaber hilts. To maintain the balance of good and evil in the universe, the laser swords are sold in packs of two, with one trans-red blade and one trans-light blue blade included. Because of the space occupied by the LEDs inside the hilts, blades may fit a little less snugly than normal if the blades are having difficulty staying mounted, you may want to use a little glue to permanently secure them to the hilts. You can also replace the included blades with blades of other colors if desired.
The 12" connecting cables on the laser swords have micro connectors which plug into the two micro plugs on the included BRANCH03 adapter board. The larger connector on the BRANCH03 board connects to a power source (sold separately) or to other components in the Brickstuff lighting system.
Because the LEDs inside these laser swords are hand soldered, they are extremely fragile. Use extreme care when pulling on the wire coming out of the hilts,and use care when connecting or disconnecting the micro plugs to the included BRANCH03 adapter.
The connecting cables on the laser swords are thin enough that you can snap LEGO bricks directly onto the wires, allowing you to hide the wires in your display so they will not interfere with the battle between good and evil. Carry on