Compatible with 2X intelligent car alarm systems, featuring a one-button start/stop function, ignition lock, and anti-theft functionality.

Operating Instructions: Entering Anti-theft Mode: 15 seconds after each engine shutdown, the main unit sends a tweet indicating the system has entered anti-theft mode. At this time, the start button indicator light goes out, the entire vehicle is powered off, and starting is ineffective. Exiting Anti-theft Mode: When the ID sensor card approaches the vehicle's induction coil area, the main unit sends two tweets indicating the system has deactivated anti-theft mode. The start button indicator light immediately flashes, and the vehicle can be started at any time. One-button Start: Depress the foot brake, briefly press the start button once, and release. The vehicle will automatically start after 0.5 seconds. One-button Off: Depress the foot brake, briefly press the start button once, and release. The vehicle will immediately turn off. One-button Start Sound: Without pressing the foot brake, briefly press the one-button start button to turn on the sound. Functions the same as one-button start. One-button Instrument Panel Open: Without pressing the foot brake, briefly press the one-button start button to open the instrument panel. After the foot brake is engaged, the instrument panel will open according to the sound prompt. Then press the start button to open the instrument panel. Once powered on, the instrument panel functions the same as the second-position button. Parameters: Operating Voltage: DC = 12V, 24V power supply not supported. Standby Current: 8mA (Note: Continuous standby can last up to one month). Button Display: Blue light (Note: Blue light is off in fireproof mode, flashes after anti-theft). Entering Anti-theft Mode: The system automatically locks the engine, cuts off power to the entire vehicle, and turns off the button lights 15 seconds after each engine shutdown. Exiting Anti-theft Mode: Using an ID card to approach the sensor coil on the train, the main unit emits two beeps before exiting anti-theft mode. Brake Light Output Flashing Voltage: DC = 12V (Note: Output time is controlled by the foot brake). Brake Light Output Form: After each braking, the first brake light flashes 4 times, then remains on. Releasing the foot pedal… Alarm: Brake light alarm; when the vehicle brakes illegally, the brake lights will flash for 15 seconds. Usage Conditions: