DIN rail mount timer Operating voltage: 230 V AC Finder 220.127.116.11.0000 1 change-over 16 A 250 V AC Weekday settings, Week settings
Finally, a great application for the NFC-interface: finger gestures instead of mechanical knobs, buttons or dials to program the time switch 12.51. Here FINDER the smartphone, in order to communicate with that device. Smartphone apps have mainly the charm that you clear and intuitive to use. The device for DIN rail can be with the finder toolbox-app completely configure on the Smartphone. The configuration is done, the record is transferred into the time switch and by mere hanging up the smartphone to the device housing. The data transfer works even without power supply of the time switch, because the smartphone itself by induction ensures that the NFC-chip on reception. Therefore, it can be configured out of the box comfortable in the office, and is then programd in the same distribution or the switch cabinet is built-in.The LC-display with backlight for set-up, programming and status is easy and can be read from almost any angle. An internal battery (removable) enables current-free set-up, programming and status at 6 years power backup and to maintain the programs if operating voltage fails. The easy programming of daily and weekly program is, of course, also using joystick. The Summer/winter time is preset. Shortest switching time 30 min. Safe separation between power supply and contacts, Cadmium-free contact material.This text is machine translated.