Wireless-AC8265 is a dual mode wireless NIC module applicable for Jetson Nano Kit.Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2.Chip: Intel 8265AC; Bands: 2.4GHz / 5GHz;Speed: 300Mbps / 867MbpsWiFi protocol: 802.11ac ;Bluetooth version: 4.2; NIC interface: NGFF (M.2);Antenna interface: IPEX connectorSupported OS: Linux, Windows 10/8.1/8/7Dimensions: 22mm x 30mm x 2.4mmHow to Use:1. Remove the two screws on Jetson Nano,detach the Jetson Nano2. Connect the extension cable to Wireless-AC8265 on IPEX connector , tighten the nut and washer to each SMA connector3. Remove the NIC screw onboard, insert the Wireless-AC8265 into the M.2 socket , screw it tightly4. Insert the Jetson Nano into the socket and screw it again , connect the antennasColour: greenMaterial: PCBPackage Contents:1 x Wireless network card AC82652 x Antenna2 x IPEX to SMA cableNote: This item does not support Jetson Nano 2GB KitPlease check detailed Graphic and Textual instruction from the picture aboveOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.