Original LCD Screen and Digitizer Full Assembly for Fitbit Versa 2 Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Be aware of static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal electronic components. Wear eye protection and handle glass carefully to avoid injury. Tip 2: Simulate testing Screen replacements are fragile. Test the screen before full installation. Partially disassemble the watch, connect the motherboard to the new LCD/screen assembly via the audio cable, power on the device, and complete testing. If the screen functions properly, proceed with installation. If the screen does not display, immediately. Do not force installation if the screen is not working. We are not responsible for units installed without prior testing. Tip 3: Avoid cable over-bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in a black display. Product Information 1. Replacement LCD screen and touch screen digitizer assembly for Fitbit Versa 2 2. Replace damaged or non-functional screens with a new unit 3. Restore your device’s appearance and performance 4. Designed for precise fit and full functionality 5. Each unit is tested and confirmed in good condition before shipping 6. Professional installation is highly recommended. We are not responsible for issues arising after installation.