Description: Material: ABS PC Voltage: 100-240V 50/60Hz Max. Current: 16A Working Temperature: -20~50 Wireless: WiFi 2.4GHz 802.11b/g/n Specifications: Set up your HomePod, HomePod mini, Apple TV, or iPad as a home hub To enable HomeKit remote control, you need a HomePod, an Apple TV 4K, Apple TV HD, or an iPad. Set any of these Apple devices in your house as a HomeKit bridge and connect it to your home Wi-Fi network. Keep in mind that once your HomeKit bridge is set up, it has to be kept online. If it is powered off or disconnected from the Wi-Fi, it will fail to respond when you intend to control the device remotely. How to install Smart Switch to your Apple Home App Power on the device and use your compurter or phone search the WiFi until find Homekit_xxxxx and click to connect, wait several seconds until configuation page pop up. After you connect it, the configuration web will pop up automatically ( If not, please use your web browser visit IP address: 192.168.4.1 , then choose the WiFi router you want to connect (make sure connect to 2.4G not 5.8G) Choose your router and input the password, then save Open Apple Home APP and click to add accessory, scan the code or choose" I Don't Have a Code or Cannot Scan" to install manually While Home app find the device click it then press Add Anyway The device has been successfully installed Package Included: smart switch*1 Notes: For 3-way switch only one smart mini relay switch needed