Product description:Environmentally neutral solvent-free professional impregnation for absorbent natural and artificial stones. Application:for: oil, grease, dirt, moisture, algae, mossProperties: Reduces the absorbency of the surface and thus reduces the penetration of oil, grease, dirt and moistureSurface remains breathable, staining is largely prevented and cleaning is made much easier (easy-care equipment)Reduced moisture absorption protects against algae and moss infestationInvisible, low-odour and breathableInstructions for use:The surface to be treated must be Be dry, clean, stain-free and absorbent. An existing underfloor heating system must be switched off before processing. The processing temperature should be between +10°C and +25°C. Shake the bottle well before use. Apply generously and evenly with a garden sprayer, spray bottle, foam roller, brush, sponge or cloth. For polished surfaces, ensure even distribution by wiping over them several times. For highly absorbent surfaces, treat only small sections. Avoid puddles and drops or wipe off immediately. Product residues must not dry on the surface, so wipe off any excess completely before drying. To do this, moisten the cloth with isopropanol or similar. This is important if the substrate is unevenly absorbent. For particularly absorbent substrates (e.g. sandstone), repeat the process after approx. 10 minutes (work wet on wet). Full effectiveness only occurs after about 48 hours. If the effect wears off, the area can be treated again. Heavily used surfaces, such as kitchen worktops, washbasin covers, etc., should be treated once a year. Store frost-free, cool and sealed. Use product only undiluted. Certain materials may appear darker as a result of the treatment. Weakly absorbent horizontal surfaces should not be sprayed as a matter of principle. Do not apply in strong sunlight or rain. Wipe off splashes on wood, glass, PVC, painted surfaces and permanently elastic joints immediately with a damp cloth. Clean tools with water. Free of organic solvents. In principle, this product should be tested for compatibility on a concealed area before use. In the event of improper handling, any liability for any damage expires.Coverage: approx. 6-20 m² / LHgenerator Article number: H 120 110 001Package size: 1 litre bottleImportant information:Download "Safety Data Sheet" for this productLabelling according to Regulation (EC) No. 1272/2008 [CLP/GHS] Safety instructions:P102 - Keep out of reach of children. P260 - Do not inhale dust/smoke/gas/mist/vapor/aerosol. EUH208 - EUH208 contains methylchloroisothiazolinone, methylisothiazolinone, benzisothiazolinone. May cause allergic reactions. Use by non-professional users is permitted. This product information does not replace compliance with the instructions for use and does not claim to be complete. Always read the label and product information before use.