Full EOBD/ OBDII Diagnostic:The Full EOBD/ OBDII function supports American all car after 1996(Compliant OBDII standard protocol), including SUV, mini van, mini-truck, light super duty or other light duty vehicles. 1.Read Codes: Identifies which section of the e-mission control system has malfunctioned. [including Stored Codes, Pending Codes, Permanent Codes] 2.Erase Codes: Erasing the Diagnostic Trouble Codes may allow the scan tool to delete the fault codes from the vehicle’s on-board computer. Further, the I/M Readiness Monitor Status for all vehicle monitors is reset to Not Ready or Not Complete status. Do not erase the codes before repairs or services have been performed. 3.Live Data: The View Data function allows viewing of live or real time PID data of vehicle's computer module(s) and display graph data for you. 4.View Freeze Frame Data: Freeze Frame Data allows the technician to view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. 5.View Vehicle Information: The Vehicle Info. function enables retrieval of Car Identification No., Adjust ID Nos. (CINs), Adjust Verification Nos. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles that support Mode9. 6.Retrieve I/M Readiness Status: I/M Readiness function is used to check the operations of the E-mission System on OBDII compliant vehicles. 7.o-xygen Monitor Test: OBDII regulations set by the (Society of Automotive Engineers) SAE require vehicles monitors and tests on the o-xygen sensors to identify problems related to fuel efficiency and vehicle e-missions. 8.On-Board Monitor Test: Displays test results for E-mission-Related power train components and systems that are and are not continuously monitored. 9.EVAP Test:The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. The OBD2 diagnostic tool does not perform the leak test, but signals to the vehicle's onboard computer to initiate the test. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test. 10.Modules Present: The Modules Present function displays the Module IDs and communication protocols for OBDII Modules in the vehicle. Package Contents: 1 x NL102P Scanner Tool 1 x USB Cable 1 x 6p/9P Connector For Trucks 1 x Nylon Carry Bag 1 x User Manual Only the above package content, other products are not included.