Features Compatible With Multiple Models - Ideal for Anet E12, E16, A8Plus, ET5 series, Voron, and Artillery SW X1, ensuring a perfect fit for your 3D printing needs Effortless Setup Process - Simply attach the magnetic baseplate to your heated bed and place the PEI-coated steel platform on top for quick and easy installation Durable Two-Part Design - Features a flexible steel platform with textured PEI on one side and a robust adhesive magnetic baseplate, enhancing stability during printing Superior Adhesion Performance - Achieve excellent print adhesion at 60°C, allowing for reliable and high-quality 3D prints directly on the PEI surface Easy Print Removal - After cooling to room temperature, prints detach easily; if needed, a gentle bend of the plate aids in effortless removal without damage Features: 1、[Suitable Models] The 3D printing spring steel bed plate is applicable for Anet E12 E16 A8Plus ET5 series and for Voron and for Artillery SW X1. And can do the ly fitting. 2、[Simple Operating] Very easy to use, just paste a the platform magnetic baseplate onto a heated bed, then place a steel platform with a PEI on top. The maximum temperature of the printing bed plate is 130℃. 3、[2 Parts] The PEI plate consists of two parts, a flexible steel platform coated with a textured PEI on one side and a magnetic baseplate with adhesive on the back. 4、[Print Directly] Excellent adhesion is achieved when the temperature of the heated bed is about 60°C. You can print directly on the PEI plate. 5、[Gently Bending for Removing] When the temperature of the heated bed reaches room temperature, the printout easily falls off the . If the print is still stuck, gently bending the plate will help remove it. Specification: Item Type: Magnetic Spring Steel Plate Platform Material: PEI, Spring Steel, Soft Magnet Size: Approx. 300 x 300mm / 12 x 12in Use: Good 3D Printer Accessory Tool PEI Spraying Thickness: Approx. 0.25mm / 0.01in PEI Film Thickness: Approx. 0.25mm / 0.01in Spring Steel Plate Thickness: Approx. 0.4mm / 0.02in Magnetic Rubber Plate Thickness: Approx. 1.2mm / 0.05in Overall Thickness: Approx. 2.1mm / 0.08in Package List: 1 x Spring Steel Build Platform 1 x Magnetic Rubber Plate Note: You do not need to worry about the printout curling at 60°C bed temperature. It will also print PETG well, but the temperature of the hotbed needs to be around 80？85℃. Package List 1 x Spring Steel Build Platform 1 x Magnetic Rubber Plate