A high-quality Gigabit PoE splitter that separates the PoE signal into 5V USB-C power and gigabit Ethernet via RJ45, enabling non-PoE devices to be powered over Ethernet. Deliver both power and data using a single Ethernet cable to reduce clutter and eliminate the need for multiple wall outlets. Extend power to areas up to 300 feet from the power source where AC outlets are not available. A cost-effective solution for adding plug-and-play PoE support to 5V USB-C powered devices, maximizing the utility of PoE switches, or for use with a Raspberry Pi 4 in setups where a PoE HAT is not suitable. Requires an IEEE 802.3af-compliant PoE switch or injector (PSE) and a PoE-enabled Ethernet cable to operate. Note: 1. This splitter does not support PD or QC fast charging protocols. 2. Maximum output is 5V/3A, compliant with 802.3af standards. 3. The split Ethernet cable can remain unused if a data connection is not required. 4. The split Ethernet cable does not carry power. Specifications: Compatibility: IEEE 802.3af/at Output: 5V/3A Data Speed: 10/100/1000 Mbps Input: DC 44-57V Size: Approx. 78 x 28 mm (3.07 x 1.10 in) Note: - Allow 0–1 cm variation due to manual measurement. - Colors may vary slightly due to monitor display differences. Package Includes: 1 x Gigabit PoE Splitter