2 SAT signals input is supplied 6 users simultaneously. High isolation, low insertion loss, very . Applicable to multi-satellite and multi-receiver usage. IC in switch distribute and control power supply to LNB , reducing energy consumption. 13/18V supplied by satellite receiver through coaxial cable to switch corresponding port. Capable of connecting two SATV signals simultaneously, which is switched through 13/18V. s: Zinc alloy Easy installation without any other program needed Power supplied from Receiver Specifications: LNB frequency range: 950-2150MHz Insertion loss: 5dB Return loss: 10dB Isolation: 26dB Switching voltage: 13~18V DC current consumption: 30mA Max. DC current to LNB: 500mA Input and output: 75 ohm, F type connector Model: -MS28 Colour: silver Material: zinc alloy Size: 122 x 103mm Package Contents: 1 x Satellite Signal Multiswitch Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.