RFID Smart Ring for Copying IC and ID Cards with R4 Chip Functionality

Tips: Only 125KHz low frequency is supported; 13.56MHz high frequency is not supported. Verify your type before purchasing. Carrier frequency: 125KHz RF distance: 1-3cm IC card range: Class A and B cards compliant with ISO/IEC 14443 standard, e.g., IC card (Mifare Classic, DESFire), M1, S50, UID, CUID, FUID, UFUID, etc. ID card range: Proximity cards compliant with ID standard, e.g., EM4305, 5200, 8800, T5577, -F08, etc. Operating System: Windows 7/8/10 and corresponding Windows Server versions Installation instructions: 1. Connect data cable. 2. Connect to the computer; the indicator light displays red. 3. Open the created "USB DISK". 4. Copy the operation file in the corresponding language and paste it into the computer. 5. Double-click to open the software and confirm that the device is connected. If the computer fails to identify the replicator disk, visit the provided website to download the software manually. IC card copy: 1. Place the IC card in the IC card read-write area; the indicator light displays green, then click "Read". 2. After decoding, place a new IC card or device in the IC card read-write area; the indicator light displays green, then click "Write Type-A". 3. The IC card copy is complete after writing. ID card copy: 1. Place the ID card in the ID card read-write area; the indicator light displays green, then click "Read EMID". 2. After reading, place a new ID card or device in the ID card read-write area; the indicator light displays green, then click "Write EMID". 3. The ID card copy is complete after writing. Color: Black Material: Plastic Package Contents: 1 x RFID Replicator Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. Measurement error allowed is +/- 1-3cm.