Single-Axis Solar Tracker with Light-Seeking Module for Automatic Sunlight Alignment

Name: Single-axis tracking board Voltage: 5-5.5VDC Current: less than 1.5A Interface: Power + - Motor M Principle: Uses a shield on the photoresistor. When light irradiates the shield and creates a shadow, a difference in photosensitivity between the two sides controls the motor to find the balance point, which is the center position. Power supply requires a 5-5.5V DC source with sufficient current up to 1.5A. The motor is a geared type; slower speed is recommended. The unit is compatible with JGY370 6V motor. At 5V power supply, the motor operates at a stable speed under no load. If the motor speed is too high, it may cause slight left-right movement when aligned, but will not jitter. The circuit includes a short delay for anti-shake functionality. When connecting the motor to the board, polarity is not critical. If the motor rotates in the opposite direction, simply swap the motor wire connections. The power supply must be regulated 5-5.5V and should not be directly connected to a solar panel. Color: Black Material: ABS Size: 36x16x1.2mm Package Contents: 2 x Probe 1 x Motherboard Note: Light reflection and display differences may cause slight color variation between the image and actual item. Measurement error allowance is +/- 1-3cm.