Descriptions: Wire bolted bushing is a new type of fastening technology, which can effectively improve the condition of the joint and greatly enhance the reliability of the bolted joint. Characteristics: Used in a variety of low strength materials, which can improve the wear resistance of bolted joints and avoid thread damage. Due to some flexibility, it can make the thread load more even, eliminate the screw and bolt hole deviation between pitch and tooth type, and can absorb vibration, thus increasing the thread joint strength and fatigue strength. Locking wire bushing can lock the bolt in the threaded hole, so that the bolt will not loosen under the impact of shock vibration, which is better than normal locking device. The hardness of the wire screw is higher than that of the screw, so it has little wear due to the screw, and can be used repeatedly. Increase the connection strength and improve the connection condition, avoid wire slippage, improper tooth phenomenon, and achieve excellent connection performance. It is used for the place where the heavy duty connection does not increase the diameter of the bolt hole Wear-resistant Used for frequent disassembly, can greatly improve thread life. Anti-loose. Especially for airplanes and other products that require high insurance factors. Easy to maintain. Damaged screw holes should be inserted into a wire sleeve that can be reused to avoid possible damage to the workpiece. Technical data: Material: Stainless steel Quantity: 60 Weight: 104g Size: (inner diameter x thread pitch x length), 2D 2 x inner diameter M3x0.5x2D (10 pcs.) M4x0.7x2D (10 pcs.) M5x0.8x2D (10 pcs.) M6x1.0x2D (10 pcs.) M8x1.25x2D (10pcs) M10x1.5x2D (5pcs) M12x1.75x2D (5pcs) Package includes: 60 x wire sleeve