The flocking kit is made of engineering ABS, which is firm and strong, and is suitable for planting 3-5mm, 5-10mm grass.Appropriate size, comfortable grip, low power consumption in the internal circuit of the handle, and high output voltage, making it highly efficient.Small space-Flocking gun is specially designed for small area flocking, sand table model building and other DIY scenes. The perfect machine for flocking plant models, landscape models, and architectural models.Plug Type:US Plug,it applies to Canada, India, Mexico, Thailand, the United States, the Philippines,Taiwan and so on.Instructions:1. First unscrew the net cover, and pour the required grass needles into the transparent container (about 1/3 is enough)2. Tighten the mesh cover again (note Make sure that the normal contacts in the container can be connected to the metal mesh of the mesh cover)3. Then apply white latex to the facade of the desired value4. Tighten the negative melting head (plastic sleeve) next to the required grass planting elevation.5. Then put the net cover (the grass exit part) to the required grass position, the distance is about 3-5cm.6. Turn the power switch to "ON" position, and then press the middle oval button to switch operations.(At this time, the metal mesh will be energized with 5000V DC high-voltage current, and the cutter should not be touched).7. After use, release the oval button switch and the work light will go out.colour: as shownMaterial: ABSPackage Contents:1 x brush1 x electrostatic grass1 x electrostatic grass applicator2 x mesh covers1 x Chinese and English manualOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.