Product Features: This is a grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU/GPU and designated coolers to transfer the dissipated heat from the components to the heat sink. It eliminates the risks of causing short circuit and in turn adding more for protection to your computer. The new formula features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components. Its texture is just thin enough to spread onto components using fingers without creating much mess. Smearing Steps: 1.Clean up the surface. 2.Use Thermal Grease on the CPU/GPU surface center. 3.Using scraper or other tools to smear the thermal paste onto the CPU. 4.After coating the product,the thickness is based on A4 paper thickness. Warm notice: Keep children away from it. If it is swallowed or inadvertently come into eyes, ear, nose, mouth,please flush with clean water or send to hospital when necessary. Storage: Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity. model:ZF-10 Color: Gray Thermal Conductivity: 10.8W/for m k Thermal Resistance: 0.003k/for w Operating Temperature: -160c ~ +280c Content: 4g Quantity:1Pc Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1Pc x ZF-10+scraper (other accessories demo in the picture are not included)